TECHNOLOGY

PERFORMANCE STARTS WITH THE RIGHT MATERIAL AND CONSTRUCTION.

ArmEdge considers material, construction, testing and application together. Materials are selected according to the intended product, environment and verified performance requirement — not simply by brand name or appearance.

INCENDURA™

FLAME PROTECTION. ENGINEERED FURTHER.

INCENDURA™ is ArmEdge's flame-protection textile platform for protective and operational applications where heat and flame performance must be considered together with wearability, construction and end-use requirements.

Depending on the project, INCENDURA™ solutions may be configured around different fibre, fabric and garment constructions. Verified performance information should be considered against the specific material or product configuration rather than applied as a blanket claim across the entire platform.

Ironaught™

STRENGTH WHERE IT MATTERS.

Ironaught is ArmEdge's durable technical textile platform for demanding operational use, including weather-protection and high-wear applications where material strength, construction and long-term field performance matter.

Material configuration is selected according to the product requirement. Applicable waterproof, breathability, abrasion or durability claims should be displayed only where supported by the specific construction and verified test information.

High-Visibility & Reflective Systems

VISIBILITY BUILT INTO THE REQUIREMENT.

ArmEdge works with reflective and high-visibility materials selected around visibility, movement, garment construction and the intended operating environment. Reflective placement is developed as part of the overall product design rather than treated as an afterthought.

Where a project requires a particular visibility or reflective standard, the applicable requirement and verified test result should be stated on that specific product or project page.

Reinforced Lightweight Materials

DURABILITY WITHOUT UNNECESSARY BULK.

For high-wear areas, ArmEdge can develop with high-tenacity reinforced materials and engineered constructions selected for abrasion resistance, tear strength and durability while controlling unnecessary weight and stiffness.

The objective is not to use the heaviest fabric available. It is to place the right reinforcement, construction and material where the product needs it most.

Construction Engineering

Material performance is only one part of the system. Seam type, reinforcement placement, closures, hardware, pattern geometry, load paths and construction methods are considered together according to the intended use.

SEAMS

REINFORCEMENT

HARDWARE

PATTERN

LOAD PATHS

Testing & Standards

Standards and test reports are shown only where they apply to the specific product, material or project. ArmEdge does not use one certification claim across unrelated products.

ABRASION

TEAR STRENGTH

WATERPROOF

BREATHABILITY

FLAME RESISTANCE